Liquid Nitriding

Liquid Nitriding is one of the pioneering processes carried out to improve the surface properties of Steel & cast iron components. It is a case hardening technology.

PVD Coatings

Physical vapour deposition and plasma-assisted chemical vapour deposition (PVD and PACVD) are environmentally-friendly vacuum deposition technologies involving a deposition of material on the surface of the parts to be treated.

Engineered Bushings

HEF bushings are recognized worldwide for their excellent frictional and anti-seizure properties, and ability to withstand high loads.
Engineered Bushings
OverviewPEL BushingsPEL HP BushingsHardened Steel BushingsIndustries ApplicationsOther Bushing Products
Downloads & Presentation
PEL BH AND PEL BHR VS CARBURIZED BUSHINGSPEL RANGE VS BRASS BUSHINGSPEL HP BUSHINGSBUSHINGSPEL LG® BUSHINGS
News
Photonics
Expo Events

PEL® HP BUSHINGS

PEL® HP bushings have an excellent resistance to wear and seizure thanks to the combination of a duplex surface treatment and optimized surface topography.

They work very well in translation movement and are appropriated to works in severe working conditions: high pressure, abrasion, shocks and corrosion.

With these bearings the intervals of lubrication are increased.
 

Dyn. Load (N/mm²) Max speed (m/s) Max Temp (°C) Abrasion resistance Shocks resistance Corrosion resistance Low-Maintenance
PEL® HP 125 1,5 250°C ++ ++ ++ +++

MATING SHAFT:

For optimal performances of the joint, the surface roughness should be inferior to Ra 0.8 μm and the hardness should be superior to 56 HRC. For optimal performances, special shafts are available from HEF DURFERRIT: PEL® ST, PEL® STC.

ADVANTAGES

Interval of lubrication up to 250 hours (depending on the working conditions)
Excellent resistance to seizure and wear
Good distribution of the grease on all the friction surface

APPLICATIONS

Attachment / grapples
Handling
Agriculture